Restarting system. __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: SHEEVA PLUG LE U-Boot 1.1.4 (Jul 14 2009 - 06:46:57) Marvell version: 3.4.16 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CF120 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM CS[1] base 0x10000000 size 256MB DRAM Total size 512MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:512 MB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: SDHC found. Card desciption is: Manufacturer: 0x1d, OEM "AD" Product name: "SD ", revision 1.0 Serial number: 74123 Manufacturing date: 12/2009 CRC: 0x00, b0 = 0 2822228 bytes read ## Booting image at 00800000 ... Image Name: Linux-2.6.32.7 Created: 2010-02-10 21:21:03 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2822164 Bytes = 2.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux.................................................................................................................................................................................. done, booting the kernel. Linux version 2.6.32.7 (newit@gemini) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-68) ) #5 PREEMPT Wed Feb 10 21:09:39 GMT 2010 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: Marvell SheevaPlug Reference Board Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootdelay=5 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 256MB 256MB = 512MB total Memory: 513152KB available (5104K code, 1034K data, 140K init, 0K highmem) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:114 Console: colour dummy device 80x30 Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Kirkwood: MV88F6281-A0, TCLK=200000000. Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. bio: create slab at 0 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US Switching to clocksource orion_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. JFS: nTxBlock = 4010, nTxLock = 32083 msgmni has been set to 1002 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled brd: module loaded loop: module loaded sata_mv sata_mv.0: version 1.28 sata_mv sata_mv.0: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 21 ata2: SATA max UDMA/133 irq 21 NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 1294 at 0x00000a1c0000 Bad eraseblock 1295 at 0x00000a1e0000 Bad eraseblock 2319 at 0x0000121e0000 Bad eraseblock 3343 at 0x00001a1e0000 Creating 3 MTD partitions on "orion_nand": 0x000000000000-0x000000100000 : "u-boot" 0x000000100000-0x000000500000 : "uImage" 0x000000500000-0x000020000000 : "root" MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed net eth0: port 0 with MAC address 00:50:43:01:4d:1c libertas_sdio: Libertas SDIO driver libertas_sdio: Copyright Pierre Ossman ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 mice: PS/2 mouse device common for all mice rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) Registered led device: plug:green:health mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new high speed SDHC card at address b368 mmcblk0: mmc0:b368 SD 7.46 GiB mmcblk0: p1 p2 mmcblk0: p2 size 15712576 exceeds device capacity, limited to end of disk mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) ata1: SATA link down (SStatus 0 SControl F300) mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers rtc-mv rtc-mv: setting system clock to 2010-03-13 17:42:42 UTC (1268502162) Waiting 5sec before mounting root device... ata2: SATA link down (SStatus 0 SControl F300) kjournald starting. Commit interval 5 seconds EXT3 FS on mmcblk0p2, internal journal EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) on device 179:2. Freeing init memory: 140K INIT: version 2.86 booting Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...done. Activating swap...done. Checking root file system...fsck from util-linux-ng 2.16.2 done. EXT3 FS on mmcblk0p2, internal journal device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Starting early crypto disks...done. Starting remaining crypto disks...done. Cleaning up ifupdown.... Loading kernel modules...done. Checking file systems...fsck from util-linux-ng 2.16.2 done. Setting up networking.... Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:50:43:XX:XX:XX Sending on LPF/eth0/00:50:43:XX:XX:XX Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 eth0: link up, 1000 Mb/s, full duplex, flow control disabled DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPOFFER from 192.168.11.1 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.11.1 bound to 192.168.11.4 -- renewal in 80070 seconds. done. Setting kernel variables (/etc/sysctl.conf)...done. Setting kernel variables (/etc/sysctl.d/bindv6only.conf)...error: "net.ipv6.bindv6only" is an unknown key failed. Cleaning up temporary files.... INIT: Entering runlevel: 2 Starting enhanced syslogd: rsyslogd. Starting periodic command scheduler: cron. Starting OpenBSD Secure Shell server: sshdNET: Registered protocol family 10 . Debian GNU/Linux squeeze/sid debian ttyS0 debian login: root Password: Last login: Sat Mar 13 17:42:06 UTC 2010 on ttyS0 Linux debian 2.6.32.7 #5 PREEMPT Wed Feb 10 21:09:39 GMT 2010 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# df Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 256740 0 256740 0% /lib/init/rw udev 10240 120 10120 2% /dev tmpfs 256740 4 256736 1% /dev/shm rootfs 7732856 406808 6933236 6% / root@debian:~# dkg -l Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii adduser 3.112 add and remove users and groups ii apt 0.7.25.3 Advanced front-end for dpkg ii apt-utils 0.7.25.3 APT utility programs ii aptitude 0.4.11.11-1+b4 terminal-based package manager ii base-files 5.1 Debian base system miscellaneous files ii base-passwd 3.5.22 Debian base system master password and group ii bash 4.1-1 The GNU Bourne Again SHell ii bsdmainutils 8.0.6 collection of more utilities from FreeBSD ii bsdutils 1:2.16.2-0 Basic utilities from 4.4BSD-Lite ii bzip2 1.0.5-4 high-quality block-sorting file compressor - ii coreutils 7.4-2 The GNU core utilities ii cpio 2.10-1 GNU cpio -- a program to manage archives of ii cron 3.0pl1-106 process scheduling daemon ii cryptsetup 2:1.1.0~rc2-1 configures encrypted block devices ii dash 0.5.5.1-3 POSIX-compliant shell ii debconf 1.5.28 Debian configuration management system ii debconf-i18n 1.5.28 full internationalization support for debcon ii debian-archive 2009.01.31 GnuPG archive keys of the Debian archive ii debianutils 3.2.2 Miscellaneous utilities specific to Debian ii dhcp3-client 3.1.3-2 DHCP client ii dhcp3-common 3.1.3-2 common files used by all the dhcp3* packages ii diffutils 1:2.8.1-18 File comparison utilities ii dmsetup 2:1.02.39-1 The Linux Kernel Device Mapper userspace lib ii dosfstools 3.0.7-1 utilities for making and checking MS-DOS FAT ii dpkg 1.15.5.6 Debian package management system ii e2fslibs 1.41.9-1 ext2/ext3/ext4 file system libraries ii e2fsprogs 1.41.9-1 ext2/ext3/ext4 file system utilities ii ed 1.4-1+b1 The classic UNIX line editor ii findutils 4.4.2-1 utilities for finding files--find, xargs ii gcc-4.4-base 4.4.2-9 The GNU Compiler Collection (base package) ii gnupg 1.4.10-2 GNU privacy guard - a free PGP replacement ii gpgv 1.4.10-2 GNU privacy guard - signature verification t ii grep 2.5.4-4 GNU grep, egrep and fgrep ii groff-base 1.20.1-6 GNU troff text-formatting system (base syste ii gzip 1.3.12-9 GNU compression utilities ii hashalot 0.3-5 Read and hash a passphrase ii hostname 3.03 utility to set/show the host name or domain ii ifupdown 0.6.9 high level tools to configure network interf ii info 4.13a.dfsg.1-5 Standalone GNU Info documentation browser ii initscripts 2.87dsf-8 scripts for initializing and shutting down t ii insserv 1.12.0-14 Tool to organize boot sequence using LSB ini ii install-info 4.13a.dfsg.1-5 Manage installed documentation in info forma ii iproute 20091226-1 networking and traffic control tools ii iptables 1.4.6-2 administration tools for packet filtering an ii iputils-ping 3:20071127-2 Tools to test the reachability of network ho ii libacl1 2.2.49-2 Access control list shared library ii libattr1 1:2.4.44-1 Extended attribute shared library ii libblkid1 2.16.2-0 block device id library ii libbsd0 0.2.0-1 utility functions from BSD systems - shared ii libbz2-1.0 1.0.5-4 high-quality block-sorting file compressor l ii libc-bin 2.10.2-2 GNU C Library: Binaries ii libc6 2.10.2-2 GNU C Library: Shared libraries ii libcomerr2 1.41.9-1 common error description library ii libcwidget3 0.5.16-3 high-level terminal interface library for C+ ii libdb4.8 4.8.26-1 Berkeley v4.8 Database Libraries [runtime] ii libdevmapper1. 2:1.02.39-1 The Linux Kernel Device Mapper userspace lib ii libedit2 2.11-20080614- BSD editline and history libraries ii libept0 0.5.30 High-level library for managing Debian packa ii libgcc1 1:4.4.2-9 GCC support library ii libgdbm3 1.8.3-9 GNU dbm database routines (runtime version) ii libgssapi-krb5 1.8+dfsg~alpha MIT Kerberos runtime libraries - krb5 GSS-AP ii libk5crypto3 1.8+dfsg~alpha MIT Kerberos runtime libraries - Crypto Libr ii libkeyutils1 1.2-12 Linux Key Management Utilities (library) ii libkrb5-3 1.8+dfsg~alpha MIT Kerberos runtime libraries ii libkrb5support 1.8+dfsg~alpha MIT Kerberos runtime libraries - Support lib ii liblocale-gett 1.05-6 Using libc functions for internationalizatio ii liblzo2-2 2.03-2 data compression library ii libncurses5 5.7+20090803-2 shared libraries for terminal handling ii libncursesw5 5.7+20090803-2 shared libraries for terminal handling (wide ii libnewt0.52 0.52.10-5+b1 Not Erik's Windowing Toolkit - text mode win ii libpam-modules 1.1.1-1 Pluggable Authentication Modules for PAM ii libpam-runtime 1.1.1-1 Runtime support for the PAM library ii libpam0g 1.1.1-1 Pluggable Authentication Modules library ii libpopt0 1.15-1 lib for parsing cmdline parameters ii libreadline5 5.2-7 GNU readline and history libraries, run-time ii libreadline6 6.1-1 GNU readline and history libraries, run-time ii libselinux1 2.0.89-4 SELinux runtime shared libraries ii libsepol1 2.0.40-2 SELinux library for manipulating binary secu ii libsigc++-2.0- 2.2.4.2-1 type-safe Signal Framework for C++ - runtime ii libslang2 2.2.2-2 The S-Lang programming library - runtime ver ii libss2 1.41.9-1 command-line interface parsing library ii libssl0.9.8 0.9.8k-8 SSL shared libraries ii libstdc++6 4.4.2-9 The GNU Standard C++ Library v3 ii libtasn1-3 2.4-1 Manage ASN.1 structures (runtime) ii libtext-charwi 0.04-6 get display widths of characters on the term ii libtext-iconv- 1.7-2 converts between character sets in Perl ii libtext-wrapi1 0.06-7 internationalized substitute of Text::Wrap ii libudev0 150-2 libudev shared library ii libusb-0.1-4 2:0.1.12-14 userspace USB programming library ii libuuid1 2.16.2-0 Universally Unique ID library ii libwrap0 7.6.q-18 Wietse Venema's TCP wrappers library ii libx11-6 2:1.3.3-1 X11 client-side library ii libx11-data 2:1.3.3-1 X11 client-side library ii libxapian15 1.0.17-1 Search engine library ii libxau6 1:1.0.5-1 X11 authorisation library ii libxcb1 1.5-2 X C Binding ii libxdmcp6 1:1.0.3-1 X11 Display Manager Control Protocol library ii libxext6 2:1.1.1-2 X11 miscellaneous extension library ii libxmuu1 2:1.0.5-1 X11 miscellaneous micro-utility library ii login 1:4.1.4.2-1+b2 system login tools ii logrotate 3.7.8-4+b1 Log rotation utility ii lsb-base 3.2-23 Linux Standard Base 3.2 init script function ii lzma 4.43-14 Compression method of 7z format in 7-Zip pro ii man-db 2.5.6-5 on-line manual pager ii manpages 3.23-1 Manual pages about using a GNU/Linux system ii mawk 1.3.3-15 a pattern scanning and text processing langu ii module-init-to 3.12~pre1-1 tools for managing Linux kernel modules ii mount 2.16.2-0 Tools for mounting and manipulating filesyst ii mtd-utils 20090606-1 Memory Technology Device Utilities ii nano 2.2.2-1 small, friendly text editor inspired by Pico ii ncurses-base 5.7+20090803-2 basic terminal type definitions ii ncurses-bin 5.7+20090803-2 terminal-related programs and man pages ii net-tools 1.60-23 The NET-3 networking toolkit ii netbase 4.40 Basic TCP/IP networking system ii netcat-traditi 1.10-38 TCP/IP swiss army knife ii openssh-blackl 0.4.1 list of default blacklisted OpenSSH RSA and ii openssh-blackl 0.4.1 list of non-default blacklisted OpenSSH RSA ii openssh-client 1:5.3p1-1 secure shell (SSH) client, for secure access ii openssh-server 1:5.3p1-1 secure shell (SSH) server, for secure access ii passwd 1:4.1.4.2-1+b2 change and administer password and group dat ii perl-base 5.10.1-9 minimal Perl system ii procps 1:3.2.8-2 /proc file system utilities ii rdate 1:1.2-4 sets the system's date from a remote host ii readline-commo 6.1-1 GNU readline and history libraries, common f ii rsyslog 4.4.2-2 enhanced multi-threaded syslogd ii sed 4.2.1-6 The GNU sed stream editor ii sensible-utils 0.0.2 Utilities for sensible alternative selection ii sysv-rc 2.87dsf-8 System-V-like runlevel change mechanism ii sysvinit 2.87dsf-8 System-V-like init utilities ii sysvinit-utils 2.87dsf-8 System-V-like utilities ii tar 1.22-2 GNU version of the tar archiving utility ii tasksel 2.81 Tool for selecting tasks for installation on ii tasksel-data 2.81 Official tasks used for installation of Debi ii traceroute 2.0.13-2 Traces the route taken by packets over an IP ii tzdata 2010b-1 time zone and daylight-saving time data ii udev 150-2 /dev/ and hotplug management daemon ii unzip 6.0-1 De-archiver for .zip files ii util-linux 2.16.2-0 Miscellaneous system utilities ii uuid-runtime 2.16.2-0 runtime components for the Universally Uniqu ii vim-common 2:7.2.330-1 Vi IMproved - Common files ii vim-tiny 2:7.2.330-1 Vi IMproved - enhanced vi editor - compact v ii wget 1.12-1.1 retrieves files from the web ii whiptail 0.52.10-5+b1 Displays user-friendly dialog boxes from she ii xauth 1:1.0.4-1 X authentication utility ii zlib1g 1:1.2.3.4.dfsg compression library - runtime root@debian:~# cat /proc/cpuinfo Processor : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 1192.75 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Marvell SheevaPlug Reference Board Revision : 0000 Serial : 0000000000000000 root@debian:~# logout